Manufacturers

My Profile

My Cart

Your Shopping Cart is Empty

Search

Home > For The Car > Roll Bars & Cages > Porsche > 914 1970 - 1976

Autopower Bolt-in Roll Cage - Porsche 914 70-76

Click to enlarge

More images

Click to enlarge

Price: $1,212.95

Product ID : 83080

Manufacturer: Autopower

0 review(s)

E-mail to a friend

Please complete this form.
All fields are required.

Your name

Your email address

Your friend's name

Your friend's email

| Add To Wish List

Purchase

Choose Roof Type

Choose Tubing Size

Paint Option

Choose Production Time

Phone Number

Quantity

Autopower Roll Bars and Cages

A Roll Bar or Cage is a special order item and is shipped factory direct to you. Your credit card will be charged at checkout. A $20.00 cancellation fee (or 5% of invoice total, whichever is higher) will be charged if the order is cancelled after it is ordered and before the item is manufactured. After manufacture, there is no cancellation allowed. Please make your selection carefully, special order items are not returnable.

The picture shown on the product page may be a representative example and may not be an actual picture for this application.

Paint Issues:

As of March 31, 2023 Autopower no longer offers paint for any roll bar or cage.

You may want to paint your roll bar or cage before final installation. It is best to check fit and drill all holes before you paint.

Shipping Issues:

Roll Bars:

All Roll Bars are oversize items and most are too large to be shipped via UPS. If your roll bar can ship by UPS, this option will appear at checkout. Most roll bars and all cages are oversize for UPS and therefore ship truck freight. We recommend that you ship to a business address as someone needs to be available to receive your part when the shipper arrives (usually between 9 AM and 5 PM).

We use Pilot Freight or SEKO for most shipments, but your product may be consigned to a third party shipper. The shipping charge for a roll bar to a California address will be $165. To the rest of the contiguous US, the charge is $235.

Roll Cages:

All roll cages ship truck freight. We recommend that you ship to a business address as someone needs to be available to receive your part when the shipper arrives (usually between 9 AM and 5 PM). Autopower ships full cages on pallets and the shipping charge will depend upon the zone that you ship to. There are two zones: California and the other 47 contiguous states. California will be $250. The other states will be $350.

There are a few cages that are too heavy to ship via our Pilot Freight flat rate program (such as the WRX Rallye Cage). This cost will depend upon the particular cage and the area of the country where it is delivered. We will be happy to provide a quote when asked.

Shipments outside of the contiguous USA

Shipments to Alaska, Hawaii, Puerto Rico or international will need to be separately quoted. We do not ship to freight forwarders! If you are ordering from one of these areas, DO NOT ORDER until after you ask for and receive a shipping quote. If you order and then determine you wish to cancel the order because the shipping quote is too high (or for any other reason), you will be accessed a cancellation charge of at least 5%!

The trucking company should call before coming to arrange a delivery schedule. I/O Port will send you an email after your product has shipped with shipping information and a tracking number.

If your delivery is attempted and no one is there to receive it or pay for it, a surcharge for redelivery will be added.

If you live near San Diego, California, you may save shipping costs by picking up your Autopower items direct from the manufacturer. If you would like this option, choose "Pick Up at Autopower" on the shipping selection.

Autopower custom makes each item, so allow 3-4 weeks for manufacture. During building season (January to June) this time might increase.

Shipment Issues:

Sometimes the shipper can damage or lose your shipment. Slight damage (like scratches and scrapes) is expected and is not considered damage. Your mounting brackets might get bent when the driver is not careful and drops the bar on the ground. Bent brackets can be straightened with a Crescent Wrench or hammer and is not considered damage. Lost shipments can take some time to find or replace. Once the shipping company decides they cannot find your shipment, paperwork will be started and Autopower will remake your bar or cage as quickly as they can. Again, there is no cancellation allowed for any reason including a lost or damaged shipment.

There is no transit time guarantee. Normal shipping time is 1-2 weeks, but if it takes longer, it takes longer. There is no refund for delayed shipments!

Please accept this notification to order.

The selected item is out of stock, please select a different item or combination

Description

Our 6-point bolt-in roll cages meet or exceed the safety requirements for most competition sanctioning organizations. Our cages have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry, and most importantly, quick exiting. Each cage is designed to conform closely to your stock interior for a clean, unobtrusive look and feel. All of our cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll cage has been designed to fit specific car models so only minor modifications are necessary for the installation.

Features:

Finished kit when installed correctly meets SCCA, NASA and most other race organization rules. Please check your class rules before ordering. (Requires shoulder harness bar and Petty bar to be compliant and you must request these pieces to be sent with your cage if you require them.)
Designed to fit tightly with most of the interior
Welding required to install
Mounts to door sills and targa bar
DOM Tubing - vehicle weight determines tube size:
- 3000 Pounds and Under - 1.50" x .120"
- 3001 Pounds and Over - 1.75" x .120"
- Vehicle weight is determined by taking the race weight as listed in your rulebook
Bars Included:
- Main Hoop
- Two Rearward Brace Plates
- Diagonal Cross Brace
- Shoulder Harness Bar (only if requested)
- Two Side Hoop Bars
- Windshield Bar
- Four Door Bars (Final fitting and welding is required to install the door bars)
Grade 5 mounting hardware and backing plates included
Autopower no longer offers a paint option; bars are shipped unpainted

Ordering information:

Production time is 3-4 weeks (plus shipping). If you are in a hurry, Autopower will make your bar within 2 weeks and then send it to you unpainted for an extra charge.
Please provide your phone number for the trucking company to contact you to arrange a delivery schedule.
The picture shown above is a representative example and is not an actual picture for this application. Secondary pictures show a drawing of how the cage will fit in the 914. The backing plates shown are to be welded to your rocker panels so you may bolt the cage to the car. Plates on the roll bar need to have a hole located and drilled to bolt to the targa bar. Door bars also need to be fitted and welded. The 914 cage requires removal of the upholstry behind the seats. This cage does not have a shoulder harness bar. If a shoulder harness bar is required, you may request extra straight tubing to be sent with the cage and you will have to fit and weld it in. Seat travel will be affected!