This harness is designed to connect any Longacre switch panel. Discard the half of the connector with the 3 unattached wires.

• Shorter yellow wire - connect to accessories that you want to shut off with the ignition - GAGELITES warning lights, dash lights, etc.
• Longer yellow wire - to your ignition system
• Gray double wire - to starter motor or solenoid
  • Large ring terminal to "hot" post
  • Smaller ring terminal to solenoid activation post

NOTE: The 2 yellow wires at the panel end are connected to the same source. They are both hot when the ignition is on. We provided 2 separate wires for your convenience. Use a grommet where the gray double wire goes through the firewall. Also use some Firebraid or other insulation if the gray wire is near the headers.