Categories

Autopower Bolt-in Roll Cage - 914 70-76

Price: $1,044.95
Product ID : 83080
Manufacturer: Autopower
E-mail to a friend | Add To Wish List

Purchase

Description

Our 6-point bolt-in roll cages meet or exceed the safety requirements for most competition sanctioning organizations. Our cages have been designed to easily install and provide maximum protection. The fit in your vehicle allows quick and easy entry, and most importantly, quick exiting. Each cage is designed to conform closely to your stock interior for a clean, unobtrusive look and feel. All of our cages are certified MIG welded and precision jig notched, providing you with the maximum strength and best fit available. Every roll cage has been designed to fit ­specific car models so only minor ­modifications are necessary for the instal­lation.

Features:

  • Finished kit when installed correctly meets SCCA, NASA and most other race organization rules. Please check your class rules before ordering. (Requires shoulder harness bar and Petty bar to be compliant and you must request these pieces to be sent with your cage if you require them.)
  • Designed to fit tightly with full interior
  • DOM Tubing - vehicle weight determines tube size:
    • 3000 Pounds and Under - 1.50" x .120"
    • 3001 Pounds and Over - 1.75" x .120"
    • Vehicle weight is determined by taking the race weight as listed in your rulebook
  • Bars Included:
    • Main Hoop
    • Two Rearward Brace Plates
    • Diagonal Cross Brace
    • Shoulder Harness Bar (only if requested)
    • Two Side Hoop Bars
    • Windshield Bar
    • Four Door Bars (Final fitting and welding is required to install the door bars)
  • Grade 5 mounting hardware and backing plates included
  • Painted in black for rust protection
Ordering information:
  • Production time is 3-4 weeks (plus shipping). If you are in a hurry, Autopower will make your bar within 2 weeks and then send it to you unpainted for an extra charge.
  • Please provide your phone number for the trucking company to contact you to receive payment and arrange a delivery schedule.
  • The picture shown above is a representative example and is not an actual picture for this application. Secondary pictures show a drawing of how the cage will fit in the 914. The backing plates shown are to be welded to your rocker panels so you may bolt the cage to the car. Plates on the roll bar need to have a hole located and drilled to bolt to the targa bar. Door bars also need to be fitted and welded. The 914 cage requires removal of the upholstry behind the seats. This cage does not have a shoulder harness bar. If a shoulder harness bar is required, you may request extra straight tubing to be sent with the cage and you will have to fit and weld it in. Seat travel will be affected!

Product Reviews

Login or Register to write the first review.