Categories

Manufacturers

Seat Back Brace Kit, I/O Port

Seat Back Brace Kit, I/O Port Racing Supplies
Click to enlarge
Price: $74.95
Product ID : SBB4
Manufacturer: I/O Port Racing Supplies
E-mail to a friend | Add To Wish List

Purchase

Description

The I/O Port Racing Supplies Seat Back Brace has met with approval by SCCA, IMSA, NASA, BMW CCA and other sanctioning body's scrutineers. This new updated aluminum kit is designed to bolt to the back of the seat and to the roll bar. Tabs are included to be welded to the shoulder harness bar.

The unique tabs will fit roll bar tubing from 1-½" to 1-¾" in diameter without modification. Other size tubing would require some grinding. Our brace adjusts from ¾" up to 11" from the shoulder harness bar. The brace is ideal for permanently mounted seats. (For multi-driver cars, see our quick adjust brace, SBB2.) The plate that bolts to the back of the seat is 2-½" x 8" for a total of 20 square inches. This brace can be used with just about any aluminum or composite seat at any angle.

SCCA, NASA, BMW CCA Club Racing, and IMSA require such braces on all non-FIA-rated seats. Please note: the design of the brace requires you to drill holes in the back of the seat and attach the bracket to the seat. Drilling holes and attaching a brace to a composite seat may void the seat warranty and/or the FIA-rating. Check with your seat manufacturer and sanctioning body rules. Installing this brace to an aluminum seat will not void any warranties and will comply with racing rules. All mounting hardware is included. Also see our seat back brace FAQs.

  • All aluminum design
  • Strong ½" thick by 1-¼" tall billet aluminum brace bars
  • Welds to tubing from 1-½" to 1-¾" in diameter
  • Adjusts from ¾" up to 11"
  • Large, 20 sq. in. mounting plate
  • Made in the USA

Product Reviews

Login or Register to write the first review.